Welcome to Glassfancy

A whole lot of fused glass and then some …

My Tips and Tricks for Product Photography, Part 2

Welcome to the second part of My Tips and Tricks for Product Photography!

In the first part I discussed the photo setup that I have tinkered together. Now we are going to take a closer look at photo backgrounds and props, photo composition and angles and depth.
All these aspects play into one another and are undoubtedly intertwined.

Before starting to shoot photos of your creations, I think it would be wise to sit down and think about the style and feel of your products. Does your needlework have a romantic flair? Do your soaps emphasis the natural and earthy? Does your jewelry fall smack in the middle of steam punk?
In your photos it is important that the background does not clash with your product style. You want it to subtly support the feel your product gives off or supply a perfectly neutral background.
In my opinion, it is also unwise to put your item in front of such a strong or busy background that it goes under and becomes anything but the main focus of the photo.

In the following photo I have tried to do all the wrong things to show you what I mean.

My fused glass is contemporary and modern, so I use very neutral props like near white stones that I found on the beach or other backgrounds that have simple but flowing lines. Since my jewelry also makes a strong color statement and is at least partially transparent, I usually tend to choose white or near white backgrounds rather than dark ones.
For metal objects, for example, a dark background would provide a better contrast and makes the item stand out better. Or for a steam punk product, to choose another example, props with sharp corners and angles are probably a better choice than backgrounds with soft flowing lines.
My main point here is to really think about what compliments your product and don’t just go for the next best item that is in arm’s reach as a background.

Now let’s look at a few more things you can do to make your photos more than just informative for your buyers.

Photo composition is a very important tool that is at your disposal. 
I encountered the rules for composition some time in school and university but I have to admit that I never consciously make my composition decisions based on any rules. I pretty much don’t remember them and I simply decide based on whether it looks good to me or not.
However, there are a gazillion articles on the web about the rules of composition in photography. And I do encourage you to read up on it but  since I am not a photographer I would rather not regurgitate someone else’s knowledge here.

If you don’t feel like reading whole articles and you don’t feel like getting all into theory about it, let me stress the most important rule, in my book, in just a few words.
Don’t center your main focus (namely your item) in the photo!

Compare the following two very similar photos.

The photo of the centered donut looks a lot more static. Placing it slightly off-center adds direction and makes the photo look more interesting.

Obviously, there are always exceptions to the rules and you should follow your instinct when it tells you to break them. I do it all the time.

Now, let’s have a look at the difference angles can make.
I believe it is always a good idea to provide one perfect frontal view among the photos that you are allowed for each item listing. But I also believe that it would be a mistake to make this frontal view photo the first photo your potential buyers see.
The first visual encounter that people have with your product should be the hottest and most gorgeous photo you have and it doesn’t always have to even show the entire item. This is your chance to capture people’s attention and make them click further into your listing.

Consider the effect of the following angles.

I usually take a few shoots from each angle and then pick the one that speaks to me most as my first representative photo. There probably is some kind of theoretical rule and explanation to the effect of each angle, but honestly, I just let my gut decide.
However, I don’t think there has been even a single instant when the frontal view was the best looking angle. And when it comes to items made of glass, you can only really show transparencies and texture when you angle your photos.

The next and last aspect that I would like to discuss in this part of the series is depth.
It mostly applies when you have more than one item in your photo but depending on your background, you can create a sense of depths with that as well.

Compare the following two almost identical photos. I chose a very simple and plain view to try to not sidetrack the eye.

You can create foreground, middle ground, and background by placing several items at different distances from the camera and shooting the photo at a very shallow angle. You can force your camera to increase or decrease the resulting blur. I found a great article that explains it really well. You can check it out HERE.

There is also another way to create this depth blur. A lot of photo editing software programs have special functions to achieve this effect. But that will be part of the discussion in the third part of this series.

I hope this post was helpful and if you have any comments or suggestions, please feel free to share!

October 9, 2010 Posted by | Photography | , , , , , , , , | 2 Comments

My Tips and Tricks for Product Photography, Part 1

Recently, I was asked to write a blog post on how I photograph my products. I was a little surprised to get that request because, although I know my photos have been getting a lot better from when I started, I have never stopped to think that they might really stand out to someone.
So I am very flattered and happy to share what I have found works for me.
A lot of the following tips and tricks have come about as a result of trial and error so you have to bear in mind that there might be a better solution that I haven’t thought of and if you would like to add anything, I would be most grateful!

The first topic that seems to be inherently important when talking about photography is the camera.
When I started selling my fused glass jewelry, I already had a camera and it wasn’t an expensive one or one with very many special features. At the time I had to make due and by doing so, I learned a little more about my camera and in the end, made it work. I still use the same camera and I don’t see a reason for me to buy a “better” one any time soon.
I use the Olympus SP-310 and in my opinion, I couldn’t have bought a better camera for the money.
Initially, I used the preset categories like the ‘Portrait’ or the ‘Indoor’ setting but realized pretty soon that I have a lot more control over what the photo looks like when I use the manual setting. By using the manual settings, you are able to determine the shutter speed and therefore have influence over the type and how much light you have to use, which is especially important when you photograph glass. When you take pictures of very shiny and reflective surfaces, you might need to reduce the light or diffuse it extensively to avoid large areas of bright white reflection. In that case you can increase the time that the shutter stays open to allow for more of the light to enter the lense and therefore still have a well-lit photo. In conclusion: more light –> faster shutter speed, less light –> slower shutter speed.
There is so much more technical information about the ‘physics’ of taken great photos but I have to admit, my understanding ends right here.

The next thing that is very important to have is a tripod.
When you use the manual settings and slow shutter speeds, the slightest movement of the camera is going to blur the whole picture.
I picked up a simple tripod for roughly $25 from Best Buy.

Next, we are getting to the light box setup.
A light box, in general, is a box made of some kind of material that permits light to shine through but diffuses it to a certain degree. The box is placed in the spotlight of several light sources and the item to be photographed sits inside the box and is therefore illuminated.
A light box doesn’t really have to be a box. The important thing is that the item is illuminated from all sides except the bottom and the light needs to be filtered through some kind of diffuser.
Here is a picture of my light box setup in my basement. It’s not very professional looking but it serves the purpose wonderfully and it didn’t cost me an arm and a leg.

There are several components to my setup.

  • the base
  • the back panel
  • the mirror
  • the side diffuser panels
  • the top diffuser panel
  • the light sources

Let’s go over each component separately.

For the base I use a couple of sturdy boxes that raise the working area up to a comfortable level. You want to make sure that you work at a level where you don’t have to exchange good photos for back pain.
I use a grate that was left over from my ferret cage as the main work surface but you can use a piece of ply wood or anything else you have available as well.

On top of the main work surface I place a mirror. It’s an old bathroom wall mirror and you can see it underneath the mannequin with the white frame.
The reason for using a mirror is that it amplifies the light you shine onto it and it also diffuses it further. In addition, it adds a certain esthetic due to the reflection it produces and you can create some cool effects with textured sheet glass, for example. The third merit of the mirror is the opportunity to quickly change the background color without having to move the item by simply standing up a colored foam board behind the scene.

And that leads us to the back panel.
The foam boards come in several different colors and can be purchased at stores like Michaels or Stamples etc.
Simply lean it again the wall behind the scene.
Check out the series of photos with different boards. The red dotted rectangle is the area you place your item in and take your photo.

The diffuser panels are called acrylic light diffuser panels for fluorescent lights and can be bought at Home Depot or Lowe’s.
I glued two of them together to increase the degree of diffusion and to make them a little more sturdy. Then I clamped on steel spring clamp and stood the panel up on the hand piece of the clamps like in the picture below.

There also is a little top diffuser panel that you can’t see in the photo of my setup. It’s basically a smaller version of the standing panels and is attached in front of the light source that hangs from the ceiling.

And that is the perfect transition to the light sources.
I figured the easiest way to create freely movable light sources are clamp lights like this one. I use two on each side clamped down in two different heights and one that is clamped in a frontal/top position on the ceiling behind the little top diffuser panel.
Most importantly though are the light bulbs you are using. They have to be daylight bulbs, meaning they produce the entire spectrum of light. Click here for an example of the right bulbs.

Wow, I did not expect this post to get so long! So I think it will be best to declare this the first part of a series of posts.

Stay tuned for more Tips and Tricks for Product Photography coming soon!

July 11, 2010 Posted by | Photography | , , , , , , , , | 13 Comments

It’s all fun and games!

NOTE (Nov 2010):
Unfortunately, the 1000 Markets venue has sold out and any of the related links in this post do not work any longer!
But here is the link to the Antiquity Gamecrafter website ( http://www.antiquitygamecrafters.com/ ) so you can still have a look at their beautiful games.

Many many years ago, when I just graduated from High School in Germany, I used to work at a game store. I got to know a plethora of board games, roleplaying games and card games. I remember we used to sell the Royal Game of Ur and some gorgeous chess games at the place.

I definitely used to and still do have a fascination for ancient games because it is a graspable concept to people now-a-days as much as it was back then. It’s something you have in common with someone who lived so long ago in a world that is entirely foreign to us.

It also reflects a lot of the attitude and art of the people and I am really most impressed with the way Antiquity Gamecrafters is projecting it into their products. I love the stone and wood combinations that they create and at the same time attempted to recapture some of the mood of the original culture.

November 28, 2009 Posted by | Uncategorized | , , , , , , , , , , , , , , , , , , , | 1 Comment

Unique Handmade Art Dolls – More Art Than Doll

Christmas is approaching fast! If you are looking for a very much unique and memorable gift, this may just be it!

Zootla doll 1Zootla doll 2

Zootla doll 3Zootla doll 4

I stumbled upon this handmade artisan doll maker on Etsy. She makes these beautiful art dolls but also has a variety of fun and very joyous little Pocket Palls and other colorful characters.

Visit her Etsy store HERE.

November 6, 2009 Posted by | Etsy | , , , , , , , , , , , , , , , , , , | Leave a comment

Handmade Jewelry Hub

NOTE (Nov 2010):
Unfortunately, the 1000 Markets venue has sold out and any of the related links in this post do not work any longer!

Twitter just introduced a new way of organizing the blizzard of tweets that you may get hit by on their site. You can now create lists of people that have one common denominator in some shape or form. It makes it a lot easier to filter what you may be interested in and avoid some of the stuff you are not.

So, since I am making handmade jewelry, it was merely a matter of time until I started a list about just that. I have accumulated more than 450 artisans that all make handmade jewelry of some kind. You will find glass, steam punk, wire wrapping, silversmithing, PMC and lots more. Come take a peek and get emerged in style, fashion, color, luxury and bling!

Twitter jewelry list

If you are creating handmade jewelry, have a twitter account and would like to be included in this list, please leave a comment or send me a direct message on Twitter.

November 4, 2009 Posted by | Artfire, Etsy | , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , | 1 Comment

My New Artfire Store

For the past week or so I have been fine tuning and accessorizing my new online store at Artfire.com.
Artfire has come a long way since I looked at it for the first time in the beginning of the year. I don’t mean to insult anybody but back then it had a kind of second-hand look to it. It was visually not very pleasing in my opinion and it was hard to find anybody that wanted to buy rather than sell anything.
I probably should have stuck with Artfire and given it a chance to develop at that time because now, visually and feature wise, I think it might be the most promising out of the three venues (Etsy, 1000 Markets, Artfire) I am a part of.
Well, I will stay with all three, at least for a while. So I guess I will find out whether or not I’m correct.
So, here is a picture of the online store front, but if you have a little time, you should probably check it out in person because there is a whole lot more to see.

VisionsInGlass / GlassFancy store front at Artfire

October 10, 2009 Posted by | Artfire, GlassFancy Jewelry | , , , , , , , , , , , , , , , , , , , , , | 1 Comment

Work In Progress

I haven’t had too much time lately to work on new pieces. It’s definitely been too long since I had some good quality glass time.

Now I am finally working on a couple of new pendants. I have them all fused and am now in the middle of cold working them.

In the photos you can see the rough edges but the semi transparent sides, which means that I have roughly ground the pendants into shape but still need to work on the finer grits of sanding the sides.

glassfancy fused glass jewelry abstract pendants necklace 1glassfancy fused glass jewelry abstract pendants necklace 2

After I have fine tuned the glass, I will drill the whole for the sterling silver wire and the bail. After the final fire polishing, it’s time for some picture taking and then you will find them listed at my Etsy and 1000 Market store.

September 27, 2009 Posted by | Fused Glass, GlassFancy Jewelry | , , , , , , , , , , , , , , , | 1 Comment

Two new markets among 1000 Markets!

NOTE (Nov 2010):
Unfortunately, the 1000 Markets venue has sold out and any of the related links in this post do not work any longer!

I would like to introduce you to two markets I have joined recently. Both are part of the 1000 Market venue.

Abstractions

Artistic expressions through fine art, sculpture, glass, photography and jewelry.

Leaf Abstract 1: Black GumAscent (Fallen Leaf)Flower Garden

Click on the images to see some of my favorites from this market.

The Northeast Market

Arts & Crafts of the Northeastern United States

Crochet Hook OrganizerSunset NecklaceSpat That Out!

September 9, 2009 Posted by | Uncategorized | , , , , , , , , , , , , , , , , , , , , , , , , , , , , | Leave a comment

Happy Easter!

NOTE (Nov 2010):
Unfortunately, the 1000 Markets venue has sold out and any of the related links in this post do not work any longer!

Happy Easter everybody!!!

So here are my Easter picks, for you from 1000 Markets!!!

Easter Egg Cookies from Cakebox Cookies

Easter Egg Cookies from Cakebox Cookies

Some Bunny Loves You from ArtisticCreations

Some Bunny Loves You from ArtisticCreations

Holiday Easter Dog Dress from Twodogsandafox

Holiday Easter Dog Dress from Twodogsandafox

Bi-colored Easter Egg Crayons from Goose Hill Designs

Bi-colored Easter Egg Crayons from Goose Hill Designs

April 12, 2009 Posted by | Uncategorized | , , , , , , , , , , , , , , , , | Leave a comment

My New 1000 Market Shop

NOTE (Nov 2010):
Unfortunately, the 1000 Markets venue has sold out and any of the related links in this post do not work any longer!

"Music In The Air" Fused Glass BroochI am so excited because I just got approved for a shop on the 1000 Market venue!

OK, very sorry but I’m going to have to let out some kind of happy sound. WOOOOOOOOOOOOOOOT!!!!!

The site looks great and is very well organized.

I’m going to move all my cold worked jewelry, like the brooch on the left, over there and leave the rest on Etsy.

Please come and visit me at 1000 Markets!

April 11, 2009 Posted by | Uncategorized | , , , , , , , , , , , , | Leave a comment